Back bezel, Removing the back bezel – Dell Alienware Aurora R3 (Early 2011) User Manual
Page 2
Back to Contents Page
Back Bezel
Alienware Aurora Service Manual
Removing the Back Bezel
1.
Follow the instructions in
Before You Begin
.
2.
Remove the left side-panel (see
Removing the Left Side-Panel
).
3.
Follow the instructions from
step 3
to
step 7
in
Removing the Power Supply
.
4.
Remove the processor liquid-cooling assembly (see
Removing the Processor Liquid-Cooling Assembly
).
5.
Remove the two screws that secure the security lock panel to the chassis.
6.
Pull the security lock panel away from the chassis.
7.
Remove the two screws that secure the back bezel to the chassis.
8.
Release the tabs that secure the back bezel to the chassis.
9.
Pull the back bezel away from the chassis.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
WARNING:
Despite having a plastic shield, the processor liquid-cooling assembly may be very hot during normal operation. Ensure that it has had
sufficient time to cool before you touch it.
1
screws (2)
2
security lock panel