Dell Alienware Aurora R3 (Early 2011) - Manual (Page 21)

4. Route and connect the cables that you removed from the connectors on the master I/O board.
5. Replace the PCI-fan assembly (see Replacing the PCI-Fan Assembly ).
6. Replace the drive-bay shroud (see Replacing the Drive-Bay Shroud ).
7. Close the PCI shroud (see Closing the PCI Shroud ).
8. Replace the left side-panel (see Replacing the Left Side-Panel ).
9. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
NOTE: For information on master I/O board connectors, see Master I/O Board Components .
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.