Dell Alienware Aurora R3 (Early 2011) - Manual (Page 59)

4. Connect the cables to the connectors on the top lighting-board.
5. Replace the Media Card Reader (if applicable) (see Replacing the Media Card Reader ).
6. Replace the optical drive(s) (if applicable) (see Replacing the Optical Drive(s) ).
7. Replace the left side-panel (see Replacing the Left Side-Panel ).
8. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.