Dell Alienware Aurora R3 (Early 2011) - Manual (Page 31)

1. Follow the instructions in Before You Begin .
2. Align the screw holes on the processor liquid-cooling assembly with the screw holes on the chassis rear wall.
3. Replace the four screws that secure the processor liquid-cooling assembly to the chassis rear wall.
4. Tighten the four captive screws that secure the processor liquid-cooling assembly to the system board.
5. Connect the processor liquid-cooling assembly cables to the SYS FAN and CPU PUMP connectors on the top lighting-board.
6. Close the PCI shroud (see Closing the PCI Shroud ).
7. Replace the left side-panel (see Replacing the Left Side-Panel ).
8. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.