Replacing the right-side middle panel, Removing the right-side bottom panel – Dell Alienware Aurora R3 (Early 2011) User Manual

Page 40

Advertising
background image

 

Replacing the Right-Side Middle Panel

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Align the right-side middle panel on top of the right-side bottom panel.

 

3.

Replace the two screws that secure the right-side middle panel to the chassis.

 

4.

Replace the lighting board (see

Replacing the Lighting Board

).


 

5.

Replace the right-side top panel (see

Replacing the Right-Side Top Panel

).

 

 

6.

Connect your computer and all attached devices to electrical outlets, and turn them on.

 

Removing the Right-Side Bottom Panel

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Remove the hard-drive fan assembly (see

Removing the Hard-Drive Fan Assembly

).


 

3.

Remove the power-supply cover (see

Removing the Power Supply

).


 

4.

Disconnect the DC wire harness from the power supply.

 

5.

Remove the right-side top panel (see

Removing the Right-Side Top Panel

).


 

6.

Remove the two screws that secure the right-side bottom panel to the chassis.

1 screws (2)

2 right-side middle panel

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Advertising