Dell Alienware Aurora R3 (Early 2011) - Manual (Page 42)

5. Replace the two screws that secure the right-side bottom panel to the chassis.
6. Replace the right-side top panel (see Replacing the Right-Side Top Panel ).
7. Connect the DC wire harness to the power supply.
8. Replace the power-supply cover (see Replacing the Power Supply ).
9. Replace the hard-drive fan assembly (see Replacing the Hard-Drive Fan Assembly ).
10. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.