Dell Alienware Aurora R3 (Early 2011) - Manual (Page 48)

CPU Information
CPU Type Displays the processor type.
CPU ID Displays the processor identification code.
CPU Speed Displays the processor speed.
Cache L2 Displays the processor L2 cache size.
Cache L3 Displays the processor L3 cache size.
Advanced — Standard CMOS Features
System Date
(mm:dd:yy)
Displays current date.
System Time
(hh:mm:ss)
Displays the current time.
Device Information
SATA Port1 Displays the SATA 1 drive integrated in the computer.
SATA Port2 Displays the SATA 2 drive integrated in the computer.
SATA Port3 Displays the SATA 3 drive integrated in the computer.
SATA Port4 Displays the SATA 4 drive integrated in the computer.
SATA Port5 Displays the SATA 5 drive integrated in the computer.
SATA Port6 Displays the SATA 6 drive integrated in the computer.
SATA Port7 Displays the SATA 7 drive integrated in the computer.
SATA Port8 Displays the SATA 8 drive integrated in the computer.
Wait for `F1' If Errors If enabled, the system will HALT during boot to display system errors.
Advanced — Advanced BIOS
Features
Bootup Num-Lock Select power-on state for num-lock.
OptionROM Display Screen Allows you to enable or disable the RAID Option ROM screen during POST.
Advanced — CPU Configuration
Hyper-threading Technology If disabled only one thread per enabled core is active.
XD Bit Capability Enable XD Bit Capability to allow the processor to distinguish between the bits of code that can be executed and the
ones that cannot be executed.
Intel(R) Speedstep tech If enabled, the processor clock speed and core voltage are adjusted dynamically based on the processor load.
Intel(R) C-State Tech If enabled, C-State: Processor idle is set to C2/C3/C4.
Advanced — Integrated Devices
USB Controller Allows you to enable or disable the integrated USB controller.
HD Audio Allows you to enable or disable the integrated audio controller.
Onboard IEEE1394 Controller Allows you to enable or disable the onboard IEEE 1394 controller.
Onboard LAN Controller Allows you to enable or disable the onboard LAN controller.
LAN Option ROM Allows you to enable or disable the network controller's boot option.
Jmicron 362 ATA Controller Allows you to enable or disable the ATA controller.
ICH SATA Configuration
SATA Mode Allows you to configure the integrated hard drive controller to AHCI or RAID.
Advanced — Power Management Setup
Suspend Mode Sets the energy-saving mode of the ACPI function.
AC Recovery Sets what action the computer takes when power is restored.
Auto Power On Allows the computer to start up at a certain time.
Advanced — Frequency/Voltage Control
Current CPU Frequency Displays the current processor speed.
Current DRAM Frequency Displays the current memory speed.
Adjust Cpu Ratio Allows you to change the processor ratio.
Memory Ratio Allows you to change the memory ratio.
Extreme Memory Profile (X.M.P) Allows you to change the extreme memory profile value.
DRAM Timing Mode Allows you to change the memory timing mode.