Dell XPS 600 - Manual (Page 112)

112
Removing and Installing Parts
www
.dell.com | support.dell.com
11 Verify that your computer works correctly by running the Dell Diagnostics (see "Dell
Diagnostics" on page 58).
Processor Airflow Shroud
CAUTION:
Before you perform this procedure, follow the safety instructions located in the Product
Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer’s electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.
NOTICE:
To avoid damaging the fan power cables, do not slide the shroud too quickly.
Removing the Processor Airflow Shroud
1 Follow the procedures in "Before You Begin" on page 69.
2 Press the two shroud release levers and lift the shroud up to disengage the anchors.
3 Once the shroud has been disengaged from the anchors, unplug the fan cables from their
connectors on the system board by pressing the release tabs on the fan cable connectors while
pulling up.
anchor tabs (3)
shroud release levers (2)