Dell XPS 600 - Manual (Page 117)

Removing and Installing Parts
117
7 Open the processor cover.
8 Remove the processor from the socket.
Leave the release lever extended in the release position so that the socket is ready for the new
processor.
Installing the Processor
NOTICE:
Ground yourself by touching an unpainted metal surface on the back of the computer.
1 Unpack the new processor.
NOTICE:
You must position the processor correctly in the socket to avoid permanent damage to the
processor and the computer when you turn on the computer.
2 If the release lever on the socket is not fully extended, move it to that position.
processor cover
processor
socket
release lever