Dell XPS 600 - Manual (Page 88)

88
Removing and Installing Parts
www
.dell.com | support.dell.com
8 Before you lower the retention arm, ensure that:
• The tops of all cards and filler brackets are flush with the alignment bar.
• The notch in the top of the card or filler bracket fits around the alignment guide.
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent
the computer cover from closing properly or cause damage to the equipment.
9 Press the retention arm into place, securing the card(s) in the computer.
fully seated card
not fully seated card
bracket caught
outside of slot
bracket within
slot
alignment guide
alignment bar
alignment bar
alignment guide
retention arm
filler bracket