Dell 5535dn Mono Laser MFP User Manual
Monochrome laser mfp
Advertising
Table of contents
Document Outline
- Contents
- Safety information
- Learning about the printer
- Additional printer setup
- Installing internal options
- Attaching cables
- Verifying printer setup
- Setting up the printer software
- Setting up wireless printing
- Installing the printer on a wired network
- Changing port settings after installing a new network Internal Solutions Port
- Setting up serial printing
- Setting up the printer to fax
- Choosing a fax connection
- Using an RJ11 adapter
- Connecting directly to a telephone wall jack in Germany
- Connecting to a telephone
- Connecting to an answering machine
- Connecting to a computer with a modem
- Setting the outgoing fax name and number
- Setting the date and time
- Turning Daylight Saving Time on
- Loading paper and specialty media
- Paper and specialty media guidelines
- Copying
- Making copies
- Copying photos
- Copying on specialty media
- Customizing copy settings
- Copying from one size to another
- Making copies using paper from a selected tray
- Copying a document that contains mixed paper sizes
- Copying on both sides of the paper (duplexing)
- Reducing or enlarging copies
- Adjusting copy quality
- Collating copies
- Placing separator sheets between copies
- Copying multiple pages onto a single sheet
- Creating a custom job (job build)
- Job interrupt
- Placing information on copies
- Canceling a copy job
- Understanding the copy screens and options
- Improving copy quality
- E-mailing
- Faxing
- Scanning to an FTP address
- Scanning to a computer or flash drive
- Printing
- Clearing jams
- Understanding printer menus
- Understanding printer messages
- List of status and error messages
- Answering
- Busy
- Call complete
- Change <src> to <x>
- Check tray <x> connection
- Close door or insert cartridge
- Close finisher side door
- Connect <x>bps
- Dialing
- Disk corrupted
- Disk Full - Scan Job Canceled
- Fax failed
- Fax memory full
- Fax partition inoperative. Contact system administrator.
- Fax server 'To Format' not set up. Contact system administrator.
- Fax Station Name not set up
- Fax Station Number not set up
- Flushing buffer
- Insert staple cartridge
- Insert Tray <x>
- Install bin <x>
- Install envelope feeder
- Install Tray <x>
- Invalid PIN
- Job stored for delayed transmission
- Line busy
- Load <src> with <x>
- Load manual feeder with <x>
- Load staples
- Memory full, cannot print faxes
- Network/Network <x>
- No analog phone line connected to modem, fax is disabled.
- No answer
- No dial tone
- Queued for sending
- Ready
- Reattach bin <x>
- Reattach bin <x> – <y>
- Reattach envelope feeder
- Receive complete
- Receiving page <n>
- Remove packaging material, check <x>
- Remove paper from <linked bin set name>
- Remove paper from all bins
- Remove paper from bin <x>
- Remove paper from standard output bin
- Replace <x> if restarting job.
- Replace wiper
- Restore Held Jobs?
- Scan Document Too Long
- Scanner ADF Cover Open
- Scanner Jam Access Cover Open
- Securely clearing disk space
- Sending page <n>
- Serial <x>
- Set clock
- SMTP server not set up. Contact system administrator.
- Some held jobs were not restored
- System busy, preparing resources for job.
- System busy, preparing resources for job. Deleting held job(s).
- Unsupported disk
- Unsupported USB device, please remove
- Unsupported USB hub, please remove
- USB/USB <x>
- Waiting for redial
- 30 Invalid refill, change cartridge
- 31 Replace defective cartridge
- 32 Cartridge part number unsupported by device
- 34 Short paper
- 35 Insufficient memory to support Resource Save feature
- 37 Insufficient memory to collate job
- 37 Insufficient memory for Flash Memory Defragment operation
- 37 Insufficient memory, some Held Jobs were deleted
- 37 Insufficient memory, some held jobs will not be restored
- 38 Memory full
- 39 Complex page, some data may not have printed
- 42.xy Cartridge region mismatch
- 50 PPDS font error
- 51 Defective flash detected
- 52 Not enough free space in flash memory for resources
- 53 Unformatted flash detected
- 54 Network <x> software error
- 54 Serial option <x> error
- 54 Standard network software error
- 55 Unsupported option in slot <x>
- 56 Parallel port <x> disabled
- 56 Serial port <x> disabled
- 56 Standard parallel port disabled
- 56 Standard USB port disabled
- 56 USB port <x> disabled
- 57 Configuration change, held jobs were not restored
- 58 Too many bins attached
- 58 Too many disks installed
- 58 Too many flash options installed
- 58 Too many trays attached
- 59 Incompatible envelope feeder
- 59 Incompatible output bin <x>
- 59 Incompatible tray <x>
- 61 Remove defective disk
- 62 Disk full
- 63 Unformatted disk
- 80 Routine maintenance needed
- 88 Cartridge low
- 88.yy Cartridge nearly low
- 88.yy Replace cartridge
- 200–282.yy paper jam
- 283 Staple jam
- 290-294.yy scanner jam
- 293 Replace all originals if restarting job.
- 293.02 Flatbed Cover Open
- 840.01 Scanner Disabled
- 841-846 Scanner Service Error
- 900–999 Service <message>
- 1565 Emulation error, load emulation option
- List of status and error messages
- Maintaining the printer
- Administrative support
- Troubleshooting
- Solving basic printer problems
- Printer control panel display is blank or displays only diamonds
- Solving printing problems
- Multiple-language PDFs do not print
- Error message about reading USB drive appears
- Jobs do not print
- Confidential and other held jobs do not print
- Job takes longer than expected to print
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Solving copy problems
- Solving scanner problems
- Solving fax problems
- Solving option problems
- Solving paper feed problems
- Solving print quality problems
- Isolating print quality problems
- Blank pages
- Characters have jagged or uneven edges
- Clipped images
- Ghost images
- Gray background
- Incorrect margins
- Paper curl
- Print irregularities
- Repeating defects
- Skewed print
- Solid black or white streaks
- Print is too light
- Print is too dark
- Solid color pages
- Streaked vertical lines
- Toner fog or background shading appears on the page
- Toner rubs off
- Toner specks
- Transparency print quality is poor
- Embedded Web Server does not open
- Contacting Customer Support
- Notices
- Edition notice
- UNITED STATES GOVERNMENT RIGHTS
- Federal Communications Commission (FCC) compliance information statement
- Compliance statement
- Exposure to radio frequency radiation
- Industry Canada notices
- Radio interference notice
- European Community (EC) directives conformity
- India emissions notice
- Noise emission levels
- Temperature information
- Product disposal
- Federal Communications Commission (FCC) compliance information statement
- Notice to users of the Canadian telephone network
- Notice to users of the New Zealand telephone network
- South Africa telecommunications notice
- ENERGY STAR
- Laser notice
- Laser advisory label
- Power consumption
- Index