Dell 5535dn Mono Laser MFP - Manual (Page 214)

Menu item Description
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Specifies which color to drop during scanning, and how much to increase or
decrease the dropout
Notes:
• None is the factory default setting for Color Dropout.
• 128 is the factory default setting for each color threshold.
Contrast
0–5
Best for content
Specifies the contrast of the output
Note: “Best for content” is the factory default setting.
Mirror Image
On
Off
Creates a mirror image of the original document
Note: Off is the factory default setting.
Negative Image
On
Off
Creates a negative image of the original document
Note: Off is the factory default setting.
Shadow Detail
0–4
Adjusts the amount of shadow detail visible on a scanned image
Note: 0 is the factory default setting.
Scan edge to edge
On
Off
Specifies whether the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Sharpness
0–5
Adjusts the amount of sharpness on a scanned image
Note: 3 is the factory default setting.
Print Settings
Menu item Description
Copies Specifies the number of copies to print
Paper Source
Tray <x>
MP Feeder
Manual Paper
Manual Envelope
Specifies the paper source selected to supply paper for the printer to print from the
flash drive
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Stacks the pages of a print job in sequence when printing multiple copies
Notes:
• Off is the factory default setting. No pages will be collated.
• The On setting stacks the print job sequentially.
Understanding printer menus
214