Dell 5535dn Mono Laser MFP - Manual (Page 182)

Menu item Description
Eco-Mode
Off
Energy
Energy/Paper
Paper
Minimizes the use of energy, paper, or specialty media
Notes:
• Off is the factory default setting. Off resets the printer to its
factory default settings.
• The Energy setting minimizes the power used by the printer.
Performance may be affected but not print quality.
• Paper minimizes the amount of paper and specialty media
needed for a print job by duplexing each page. Performance
may be affected but not print quality.
• Energy/Paper minimizes the use of power and of paper and
specialty media.
ADF Loaded Beep
Enabled
Disabled
Specifies whether the ADF emits a beep when paper is loaded
Note: Disabled is the factory default setting.
Quiet Mode
Off
On
Reduces the amount of noise produced by the printer
Notes:
• Off is the factory default setting.
• On configures the printer to produce as little noise as possible.
Run Initial setup
Yes
No
Instructs the printer to run the setup wizard
Notes:
• Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the
Country select screen, the default becomes No.
Understanding printer menus
182