Dell 5535dn Mono Laser MFP - Manual (Page 223)

PostScript menu
Menu item Description
Print PS Error
On
Off
Prints a page containing the PostScript error
Note: Off is the factory default setting.
Font Priority
Resident
Flash/Disk
Establishes the font search order
Notes:
• Resident is the factory default setting.
• A formatted flash memory option card or printer hard disk must be
installed in the printer and operating properly for this menu item to be
available.
• The flash memory option or printer hard disk cannot be Read/Write, Write,
or password protected.
• Job Buffer Size must not be set to 100%.
PCL Emul menu
Menu item Description
Font Source
Resident
Disk
Download
Flash
All
Specifies the set of fonts used by the Font Name menu item
Notes:
• Resident is the factory default setting. It shows the factory default set of
fonts downloaded into printer RAM.
• Flash and Disk settings appear only if applicable and show all fonts resident
in that option.
• Flash and Disk options must be properly formatted and cannot be
Read/Write, Write, or password protected.
• Download appears only if applicable and shows all the fonts downloaded
into printer RAM.
• All shows all fonts available to any option.
Font Name
<list of available fonts>
Identifies a specific font and the option where it is stored
Notes:
• Courier 10 is the factory default setting.
• The font source abbreviation is R for Resident, F for Flash, K for Disk, and
D for download.
Symbol Set
10U PC-8
12U PC-850
Specifies the symbol set for each font name
Notes:
• 10U PC-8 is the US factory default setting.
• 12U PC-850 is the international factory default setting.
• A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
Understanding printer menus
223