Partial document or photo copies, Solving scanner problems, Checking an unresponsive scanner – Dell 5535dn Mono Laser MFP User Manual

Page 263: Scan was not successful

Advertising
background image

Partial document or photo copies

These are possible solutions. Try one or more of the following:

C

HECK

THE

DOCUMENT

PLACEMENT

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

C

HECK

THE

PAPER

SIZE

SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1

From the printer control panel, check the Paper Size setting from the Paper menu.

2

Before sending the job to print, specify the correct size setting:

For Windows users, specify the size from Print Properties.

For Macintosh users, specify the size from the Page Setup dialog.

Solving scanner problems

Checking an unresponsive scanner

If your scanner is not responding, then make sure:

The printer is turned on.

The printer cable is securely attached to the printer and the host computer, print server, option, or other network

device.

The power cord is plugged into the printer and a properly grounded electrical outlet.

The electrical outlet is not turned off by any switch or breaker.

The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.

Other electrical equipment plugged into the outlet is working.

Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem

with the scanner.

Scan was not successful

These are possible solutions. Try one or more of the following:

C

HECK

THE

CABLE

CONNECTIONS

Make sure the network or USB cable is securely connected to the computer and the printer.

A

N

ERROR

MAY

HAVE

OCCURRED

IN

THE

PROGRAM

Turn off and then restart the computer.

Troubleshooting

263

Advertising