Dell 5535dn Mono Laser MFP - Manual (Page 197)

Menu item Description
Sides (Duplex)
Off
Long edge
Short edge
Specifies how the text and graphics are oriented on the page
Notes:
• Off is the factory default setting.
• Long edge assumes binding along the long edge of the page (left edge for
portrait orientation and top edge for landscape orientation).
• Short edge assumes binding along the short edge of the page (top edge for
portrait orientation and left edge for landscape orientation).
Content
Text
Text/Photo
Photograph
Specifies the type of content that will be scanned to fax
Notes:
• Text is used when the document is mostly text.
• Text/Photo is the factory default setting. Text/Photo is used when the
documents are mostly text or line art.
• Photograph is used when the document is a high-quality photograph or inkjet
print.
Darkness
1–9
Lightens or darkens the output
Note: 5 is the factory default setting.
Dial Prefix A numeric entry field is provided to enter numbers
Dialing Prefix Rules
Prefix Rule <x>
Establishes a dialing prefix rule
Automatic Redial
0–9
Specifies the number of times the printer tries to send the fax to a specified number
Note: 5 is the factory default setting.
Redial Frequency
1–200
Specifies the number of minutes between redials
Behind a PABX
Off
On
Enables switchboard blind dialing without a dial tone
Enable ECM
On
Off
Enables Error Correction Mode for fax jobs
Enable Fax Scans
On
Off
Lets you send faxes by scanning at the printer
Driver to fax
On
Off
Allows driver to fax jobs to be sent by the printer
Allow Save as Shortcut
On
Off
Lets you save fax numbers as shortcuts in the printer
Understanding printer menus
197