Dell Latitude 12 Rugged Extreme (7204, Early 2014) - Manual (Page 13)

Installing the System Fan
1. Align the system fan in its position on the computer chassis.
2. Tighten the screws to secure the system fan to the computer chassis.
3. Connect the system fan connector cable to the system board connector.
4. Install:
a. battery
b. bottom cover
5. Follow the procedures in After Working Inside Your computer .
Removing the Memory Module
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a. battery
b. bottom cover
3. To remove the memory module:
a. Pry the securing clips away from the memory module until it pops up.
b. Remove the memory module from its connector on the system board.
13