Installing the memory module, Removing the mems board – Dell Latitude 12 Rugged Extreme (7204, Early 2014) User Manual
Page 14
Advertising
Installing the Memory Module
1.
Insert the memory module into the memory socket.
2. Press the memory module down until it clicks into place.
3. Install:
a.
b.
After Working Inside Your computer
Removing the MEMS Board
MEMS board is also known as the sensor board.
1.
Before Working Inside Your Computer
2. Remove:
a.
b.
3. To remove the MEMS board:
a. Disconnect the cable connected to the MEMS board [1,2].
b. Remove the screws that secure the MEMS board to the computer chassis [3].
c. Lift the MEMS board from the computer chassis [4].
14
Advertising