Installing the led board, Removing the battery board – Dell Latitude 12 Rugged Extreme (7204, Early 2014) User Manual
Page 30
Advertising
d. Remove the screws that secure the LED board [5].
e. Lift the LED board from the computer chassis [6].
Installing the LED Board
1.
Insert the LED board in the slot on the computer chassis.
2. Connect the screws to secure the LED board.
3. Push the LED board to secure it.
4. Connect the screws to secure the board.
5. Connect the LED board to the connector.
6. Install:
a.
b.
c.
d.
e.
f.
g.
h.
i.
After Working Inside Your computer
Removing the Battery Board
1.
Before Working Inside Your Computer
2. Remove:
a.
b.
c.
d.
e.
30
Advertising