Installing the antenna routing bracket, Removing the wlan card – Dell Latitude 12 Rugged Extreme (7204, Early 2014) User Manual
Page 22
Advertising
Installing the Antenna Routing Bracket
1.
Place the antenna routing bracket in the slot on the computer chassis.
2. Tighten the screws to secure the cable holder.
3. Route the antenna cables into the routing channels.
4. Connect all the wireless antenna cables to the connectors.
5. Secure the tapes to secure the wireless antenna cables.
6. Install:
a.
b.
After Working Inside Your Computer
.
Removing the WLAN Card
1.
Before Working Inside Your Computer
2. Remove:
a.
b.
c.
3. Disconnect the antenna cables from the WLAN card.
4. To remove the WLAN card:
a. Remove the screw that secures the WLAN card.
b. Slide and lift the WLAN card from the slot.
22
Advertising