Dell Latitude 12 Rugged Extreme (7204, Early 2014) - Manual (Page 31)

f. MEMS board
g. hard drive
h. card bracket
3. Disconnect the battery cable from the battery board.
4. To remove the battery board:
a. Remove the screws that secure the battery board [1]
b. Disconnect the battery board from the connector [2].
c. Lift the battery board away from the computer [3].
Installing the Battery Board
1. Slide the battery board to its connector.
2. Tighten the screws to secure the battery board.
3. Connect the battery cable to the battery board.
4. Install:
a. card bracket
b. hard drive
c. MEMS board
d. USH board
e. GPS module
f. docking board
g. bottom cover
h. battery
5. Follow the procedures in After Working Inside Your computer .
Removing the Keyboard Control Board
1. Follow the procedures in Before Working Inside Your Computer
2. Remove:
a. battery
b. bottom cover
c. docking board
d. GPS module
e. USH board
31