Installing the docking board, Removing the heatsink – Dell Latitude 12 Rugged Extreme (7204, Early 2014) User Manual
Page 17
Advertising
4. To remove the docking board:
a. Flip the board [1].
b. Disconnect the docking board connector cable from the system board by lifting the cable-
release tab [2].
c. Lift and remove the docking board from the computer chassis [3].
Installing the Docking Board
1.
Connect the docking board connector cable to the system board.
2. Flip the docking board and seat it on the slot.
3. Tighten the screws to secure the docking board.
4. Connect the antenna cables to the docking board.
5. Install:
a.
b.
After Working Inside Your Computer
.
Removing the Heatsink
1.
Before Working Inside Your Computer
2. Remove:
17
Advertising