Installing the fingerprint reader, Removing the led board – Dell Latitude 12 Rugged Extreme (7204, Early 2014) User Manual
Page 29
Advertising
Installing the Fingerprint Reader
1.
Place the fingerprint reader in the slot on the computer chassis.
2. Tighten the screws to secure the fingerprint reader.
3. Install:
a.
b.
c.
d.
e.
f.
g.
h.
After Working Inside Your computer
Removing the LED Board
1.
Before Working Inside Your Computer
2. Remove:
a.
b.
c.
d.
e.
f.
g.
h.
i.
3. To remove the LED board:
a. Disconnect the LED board from the connector [1,2]
b. Remove the screws from the side of the computer chassis [3].
c. Release the LED board [4].
29
Advertising