Dell KVM 1082DS - Manual (Page 129)

LDAP Feature for the RCS xxx | xxx 119
There is an equivalent display for Standard LDAP mode that appears whenever
that mode is not enabled.
Secondary LDAP Settings - Standard Configuration
As with LDAP Active Directory Configurations, Standard LDAP
authentication, search, and query parameters are configured through the remote
OBWI. Settings in this section are accessed from the User Access / LDAP /
Standard tabs via the OBWI window shown here in Figure 5.5
Figure 5.5: Secondary LDAP Settings - Standard Configuration
NOTE: While this section describes the setup parameters for connections
being made to Standard LDAP Directory Servers, please also note that this
section may also be used to establish connections to more generic versions
of Active Directory services as well.
Setting up the RCS for performing Standard LDAP queries
NOTE: Before you can use any of the querying modes with Active Directory,
you must update Active Directory so that the selected querying mode can
assign the applicable authorization level for the user.