Dell KVM 1082DS - Manual (Page 93)

The Video Viewer Window xxx | xxx 83
Numbe-
r
Description
3
Menu and toolbar: Enables you to access many of the features in the
Video Viewer window. The menu and toolbar is in a show/hide state if
the thumbtack has not been used. Place your cursor over the toolbar to
display the menu and toolbar. Up to ten commands and/or macro
group buttons can be displayed on the toolbar. By default, the Single
Cursor Mode, Refresh, Automatic Video Adjust and Align Local Cursor
buttons appear on the toolbar. For more information, see "Changing
the Toolbar" on page 83 and "Macros" on page 104.
4
Macro buttons: Commonly used keyboard sequences that can be sent
to the target device.
5
Connection Status Indicator: Indicates the status of the user that is
connected to the RCS for this server. The modes are exclusive, basic
active connection, primary active sharing, secondary active sharing,
passive sharing, stealth, and scanning.
6
Smart Card Status Indicators: Indicate whether or not a smart card is in
the smart card reader. The Video Viewer screen smart card icon is
greyed out and indicates that the smart card option is unavailable or
disabled. The icon is green if the smart card is mapped.
7 Display area: Accesses the server desktop.
8
Frame: Resizes the Video Viewer window by clicking and holding on
the frame.
Changing the Toolbar
You can choose the amount of elapsed time before the toolbar hides in the
Video Viewer window when it is in show/hide state (that is, not locked in place
by the thumbtack).
To specify a toolbar hide time:
1 Select Tools - Session Options from the Video Viewer window menu.