Dell KVM 1082DS - Manual (Page 74)

64 xxx | Local and Remote Configuration xxx
4 Select outlet 5 to display the Power Devices Outlet Settings page.
5 Select Link to Target Device, select Group2 from the drop down menu.
6 Click Save. After returning to the Outlet List, outlets 4 and 5 will have the
same name.
Figure 3.4: Target Overview for Group2
Default Outlet Names
On the Power Devices page, the checkbox “Assign Default Names to Outlets”
controls whether or not power outlets are given default names for a power
device, as shown in the following figure. Only power outlets with names are
listed on the Target page. Default assigned power outlet names may be removed
by clearing the "Assign Default Names to Outlets" checkbox and saving. Power
outlets without names are assigned default names by turning on “Assign Default
Names to Outlets” and saving.
Figure 3.5: RCS Power Devices Page