Dell KVM 1082DS - Manual (Page 99)

The Video Viewer Window xxx | xxx 89
Number Description Number Description
4
Image Capture Vertical
Position
12 Video Test Pattern
5 Contrast 13 Help
6 Brightness 14 Performance Monitor
7 Noise Threshold 15 Close button
8 Priority Threshold
2 Click the icon corresponding to the feature you wish to adjust.
3 Move the Contrast slider bar and then fine-tune the setting by clicking the
Min (-) or Max (+) buttons to adjust the parameter for each icon pressed.
The adjustments display immediately in the Video Viewer window.
4 When finished, click Close to exit the Manual Video Adjust dialog box.
Target Video Settings
The Image Capture Width, Pixel Sampling/Fine Adjust, Image Capture
Horizontal Position and Image Capture Vertical Position adjustments affect
how the target video is captured and digitized. They are seldom changed.
The image capture parameters are automatically changed by the Automatic
Adjustment function. A special image is required on the target in order to make
accurate adjustments independently.
Automatic Video Adjustment
In most cases, you do not need to alter the Video Settings from the default
settings. The system automatically adjusts and uses the optimal video
parameters. The switch OBWI performs best when the video parameters are set
such that no (0) video packets are transmitted for a static screen.