Dell Inspiron 531s (Mid 2007) - Manual (Page 104)

104
Removing and Installing Parts
3 Remove the two screws securing the cover, using a flat-blade screwdriver.
4 Release the computer cover by pulling it away from the front of the
computer and lifting it up.
5 Set the cover aside in a secure location.
Removing the Support Bracket
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 101.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 103).
3 Release the card retention bracket by lifting the card retention release lever up.
1 computer cover 2 screws (2)
1
2
book.book Page 104 Wednesday, April 16, 2008 3:33 PM