Installing the i/o panel – Dell Inspiron 531s (Mid 2007) User Manual
Page 154
154
Removing and Installing Parts
Installing the I/O Panel
1 Place the I/O panel into the slot.
NOTICE:
Take care not to damage the cable connectors and the cable routing clips
when sliding the I/O panel into the computer.
2 Align and slide the I/O panel clamp in the I/O panel clamp slot.
3 Replace and tighten the screw that secures the I/O panel.
4 Reconnect the cables to the system board.
5 Replace the bezel (see "Replacing the Bezel" on page 124).
6 Replace the computer cover (see "Replacing the Computer Cover" on
7 Connect your computer and devices to an electrical outlet, and turn them on.
8 Verify that the computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 84).
1
screw
2
I/O panel
2
1
book.book Page 154 Wednesday, April 16, 2008 3:33 PM