Dell Inspiron 531s (Mid 2007) - Manual (Page 137)

Removing and Installing Parts
137
NOTE:
To comply with FCC regulations, it is recommended that you replace the
FlexBay drive insert whenever the floppy drive is removed from the computer.
Media Card Reader
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, laceration by moving fan blades, or
other unexpected injuries, always unplug your computer from the electrical outlet
before opening the cover.
Removing a Media Card Reader
1 Follow the procedures in "Before You Begin" on page 101.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 103).
3 Remove the bezel (see "Removing the Bezel" on page 123).
4 Remove the CD or DVD drive (see "Removing a CD or DVD Drive" on
page 142).
5 Disconnect the FlexBay USB cable and the power cable from the back of
the Media Card Reader and from the internal USB connector on the
system board (see "System Board Components" on page 107).
6 Press the two spring clamps and slide out the Media Card Reader along
with the FlexBay drive cage from the FlexBay slot.
1 bezel 2 insert lever 3 FlexBay drive insert
1
2
3
book.book Page 137 Wednesday, April 16, 2008 3:33 PM