Dell PowerEdge RAID Controller 6i - Manual (Page 43)

Installing and Configuring Hardware
43
Figure 4-2. Installing a PERC 6/i Adapter
7 Tighten the bracket screw, if any, or use the system’s retention clips to
secure the controller to the system’s chassis.
8 For PERC 6/E adapter, replace the cover of the system. For more
information on closing the system, refer to your system’s Hardware
Owner’s Manual.
1 bracket screw 3 PCI-e slot
2 PERC 6/i adapter 4 filler brackets
2
4
3
1
Dell_PERC6.1_UG.book Page 43 Wednesday, April 15, 2009 4:18 PM