Dell PowerEdge RAID Controller 6i - Manual (Page 44)

44
Installing and Configuring Hardware
9 Connect the cable from the external enclosure to the controller.
See Figure 4-3.
Figure 4-3. Connecting the Cable From the External Enclosure
10 For PERC 6/i adapter, connect the cables from the backplane of the
system to the controller. The primary SAS connector is white and the
secondary SAS connector is black. See Figure 4-4.
1 connector on the controller 3 cable from the external enclosure
2 system 4 memory module
3
2
1
Dell_PERC6.1_UG.book Page 44 Wednesday, April 15, 2009 4:18 PM