Dell PowerEdge RAID Controller 6i - Manual (Page 5)

Contents
5
Redundant Path With Load
Balancing Support
. . . . . . . . . . . . . . . . . 37
Using Replace Member and
Revertible Hot Spares
. . . . . . . . . . . . . . . 37
Patrol Read . . . . . . . . . . . . . . . . . . . . . . . . 38
Patrol Read Feature . . . . . . . . . . . . . . . . 38
Patrol Read Modes . . . . . . . . . . . . . . . . . 39
3 Installaing and Configuring
Hardware
. . . . . . . . . . . . . . . . . . . . . . . . 41
Installing the PERC 6/E and PERC 6/i Adapters . . . . . 41
Installing the Transportable Battery
Backup Unit (TBBU) for PERC 6/E
. . . . . . . . . . . . 45
Installing the DIMM on a PERC 6/E Adapter . . . . . . 47
Transferring a TBBU Between Controllers . . . . . . . 49
Removing the PERC 6/E and PERC 6/i Adapters . . . . . 50
Removing the DIMM and Battery from
a PERC 6/E Adapter
. . . . . . . . . . . . . . . . . . . 53
Disconnecting the BBU from a PERC 6/i Adapter
or a PERC 6/i Integrated Controller
. . . . . . . . . . . 55
Setting up Redundant Path Support
on the PERC 6/E Adapter
. . . . . . . . . . . . . . . . . 56
Removing and Installing the CERC 6/i
Modular Storage Controller Card
(Service-Only Procedure)
. . . . . . . . . . . . . . . . 59
Installing the Modular Storage
Controller Card
. . . . . . . . . . . . . . . . . . . 61
Dell_PERC6.1_UG.book Page 5 Wednesday, April 15, 2009 4:18 PM