Dell PowerEdge RAID Controller 6i - Manual (Page 52)

52
Installing and Configuring Hardware
Figure 4-8. Removing the PERC 6/i Adapter
6 Disconnect the data cables and battery cable from the PERC 6/i. Remove
any retention mechanism, such as a bracket screw, that might be holding
the PERC 6/i in the system, and gently lift the controller from the system’s
PCI-E slot.
NOTE:
For more information on removing the PERC 6/i adapter from the system, see
your system’s Hardware Owner’s Manual.
1 bracket screw 3 Dirty Cache LED location
2 PERC 6/i
2
3
1
Dell_PERC6.1_UG.book Page 52 Wednesday, April 15, 2009 4:18 PM