Dell PowerEdge 7250 - Manual (Page 48)

46 BMC Management Utility
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m Menu option 2 allows you to enable, disable, and configure the SOL defaults, including the
minimum user privilege level required for activating SOL and the communication baud-rate.
Menu options 3 and 4 allow you to establish a SOL remote console session through the SOL Proxy
main menu. Menu option 3 establishes a SOL session without changing the remote system’s state.
This option is ideal for connecting to the Microsoft SAC/EMS or the Red Hat Linux console.
Menu option 4 reboots the remote managed system and establishes a SOL session. This option
best suited for performing BIOS setup and system configuration tasks.
To exit an active SOL session, use the <~><.> character sequence. The sequence is used to
terminate SOL and return you back to the top-level menu.
Connecting to the Remote Managed System’s BMC
NOTE: While multiple SOL sessions can be active at the same time, only one console redirection session
can be active at any given time for a managed system.
1 Select option 1 in the main menu.
2 Enter the IP address of the remote managed system.
3 Provide the BMC username and password for the BMC on the managed system. The BMC
username and password must be assigned and stored in the BMC non-volatile storage. See
"Configuring Your Managed System" for more information about configuring BMC users.
Only one SOL session with one BMC is permitted at one time.
The connection status displays on the main menu. See Figure 3-11.