Dell PowerEdge 7250 - Manual (Page 51)

BMC Management Utility 49
Figure 3-13. Configuring the Serial-Over-LAN for the Remote System, Example 2
• If SOL is enabled, two BMC settings are displayed:
– The communication baud-rate between the system serial port and the BMC.
– The minimum BMC user privilege level required for activating console redirection.
SOL Proxy displays a list of valid values for each feature, as well as the current value of the
feature enclosed in a pair of brackets. You can select the number before a value to set it as the
new setting, or press <Enter> to leave the BMC settings unchanged. If changes are made to
the BMC settings, you are asked to confirm your changes. The new BMC settings are then
displayed. See Figure 3-14.