Dell PowerEdge 7250 - Manual (Page 62)

60 BMC Management Utility Error Codes
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
Invalid IP address. IP resolving error.
Session buffer limit
exceeded.
Length exceeds the limit
of telnet input.
A6h
A8h Syntax errors. Command syntax error. Unable to parse
command.
Unrecognized command. Unrecognized
Command.
Time format is incorrect. The time is not correct.
Conflicting option. Conflicting option (-last
and -max).
Invalid parameter. Invalid Parameter.
A7h Parameter value
errors.
Parameter out of range. Parameter out of range. 0xC9
Parameter out of range (1-
255)
The value is out of range
(1-255).
Parameter out of range(1-
65535).
The value is out of range
(1-65535).
Invalid data field. Invalid data field. 0xCC
Invalid index value. Index cannot be zero or a
negative number.
First index larger than the
last.
The first index is larger
than the last.
First index larger than total
SEL records.
The first index is larger
than the total SEL
records.
A8h H/W or F/W
errors.
Unsupported command. Unsupported Operation. 0xC1
Sensor not present. Request sensor, data, or
record not present.
0xCB
Sensor command error. Command illegal for
specified sensor or record
type.
0xCD
Firmware error. Command response
could not be provided.
0xCE
Table A-1. BMC Management Utility Error Codes (continued)
Code Classification Message Description IPMI Error