Dell PowerEdge 7250 - Manual (Page 57)

BMC Management Utility 55
Retry Interval
retry_interval — specifies the period of time in seconds that the BMC waits before it retries
sending a packet. The retry_interval unit is half a second. Therefore, a value of 2 means that the
software waits one second for the BMC to respond before it tries to resend the packet, a value of 4
means that it waits two seconds, and so on. For example:
retry_interval=2
Retry Count
retry_count — specifies the maximum number of times that the software retries sending a packet if
it does not receive a response from the BMC. Before each retry, the software waits for the interval
specified by the retry_interval parameter. For example:
retry_count=10