Dell PowerEdge 7250 - Manual (Page 69)

Using Console Redirection 67
After creating macros for the keys listed in Table B-1, press <F1> on the client system's keyboard
during terminal emulation to send the escape sequence <Esc><O><P> to the host system. The
host system then interprets the sequence as <F1>.
Additional escape sequences may be required by certain utilities or functions on the host system.
Create macros for the additional sequences listed in Table B-2.
NOTE: Escape-sequence key combinations listed in Table B-2 are case-sensitive. For example, to
generate the character <A> you must press <Shift><a>.
.
<Shift><Tab> <Esc><[><Z> VT 100
<Esc><[><0><Z> VT 220
<Esc><[><Shift><z> ANSI
Table B-2. Additional Escape Sequences
Key(s) Supported Sequence
<Ctrl><Alt><Del>
(Reboot host system)
<Esc><R><Esc><r><Esc><R>
<Alt><x> <Esc><X><X>
<Ctrl><H> <Esc><Ctrl><H>
<Ctrl><I> <Esc><Ctrl><I>
<Ctrl><J> <Esc><Ctrl><J>
<Ctrl><M> <Esc><Ctrl><M>
<Ctrl><2> <Esc><Ctrl><2>
Table B-1. Supported Escape Sequences (continued)
Key(s) Supported Sequence Terminal Emulation