Dell Studio 1735 (Mid 2008) - Manual (Page 14)

Back to Contents Page
Coin-Cell Battery
Dell™ Studio 1735/1737 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1. Follow the procedures in Before You Begin .
2. Turn the computer over and remove the base cover (see Removing the Base Cover ).
3. Use a plastic scribe to push the coin cell battery forward and upward to release it from the slot.
Replacing the Coin-Cell Battery
1. Replace the coin cell battery with the positive (+) side facing upwards.
2. Replace the base cover (see Replacing the Base Cover ).
3. Slide the battery into the bay until it clicks into place.
Back to Contents Page
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
1 coin-cell battery