Palm rest, Removing the palm rest – Dell Studio 1735 (Mid 2008) User Manual
Page 41
Back to Contents Page
Palm Rest
Dell™ Studio 1735/1737 Service Manual
Removing the Palm Rest
1.
Follow the instructions in
Before You Begin
.
2.
Press and eject any installed cards from the ExpressCard slot and the 8-in-1 memory card reader.
3.
Remove any installed memory modules and Mini-Cards (see
Memory
and
Communication Cards
).
4.
Follow the instructions in
Display Assembly
.
5.
Turn the computer upside down and remove the eight screws from the computer base.
6.
Turn the computer top side up and remove the four screws from the top of the palm rest.
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as the back panel) on the computer.
1 screw (4)
2 palm rest
3 media control buttons cable
connector
4 touch pad cable connector