Microphone, Removing the microphone, Replacing the microphone – Dell Studio 1735 (Mid 2008) User Manual
Page 33
Back to Contents Page
Microphone
Dell™ Studio 1735/1737 Service Manual
Removing the Microphone
1.
Follow the instructions in
Before You Begin
.
2.
Press and eject any installed cards from the ExpressCard slot and the 8-in-1 memory card reader.
3.
Remove any installed memory modules and Mini-Cards (see
Memory
and
Communication Cards
).
4.
Follow the instructions in
Removing the Palm Rest
.
5.
Disconnect the microphone cable connector.
6.
Remove the microphone from the computer base.
Replacing the Microphone
1.
Place the microphone in the computer base.
2.
Connect the microphone cable to the connector on the system board.
3.
Follow the instructions in
Replacing the Palm Rest
.
4.
Reinstall the memory modules and Mini-Cards, if any.
5.
Reinstall any removed cards in the ExpressCard and 8-in-1 card slots.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as the back panel) on the computer.
1 system board
2 microphone
3 microphone cable connector
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.