Dell Studio 1735 (Mid 2008) - Manual (Page 23)

2. Remove the display bezel (see Display Bezel ).
3. Remove the display panel (see Removing the Display Panel ).
4. Turn the display panel over and place it on a clean surface.
5. Lift the tape that secures the display cable to the connector on top and disconnect the cable from the connector.
Replacing the Display Panel Cable
1. Reconnect the display cable to the connector on top and secure it with the tape.
2. Replace the display panel (see Replacing the Display Panel ).
3. Replace the display bezel (see Replacing the Display Bezel ).
4. Follow the instructions in Replacing the Display Assembly .
Display Inverter
Removing the Display Inverter
1. Follow the instructions in Display Assembly .
2. Remove the display bezel (see Display Bezel ).
3. Disconnect the cables from the connectors on either side of the inverter board.
4. Remove the screw that secures the inverter board and lift the inverter board off the display assembly.
Replacing the Display Inverter
1 tape 2 display cable
1 screw 2 inverter board