Dell Alienware 15 (Early 2015) - Manual (Page 102)

Replacing the camera
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Using the alignment posts, adhere the camera module to the display back-
cover.
2 Connect the camera cable to the camera module and adhere the tape that
secures the camera cable to the camera module.
Post-requisites
1 Replace the display panel .
2 Follow the procedure from step 2 to step 5 in “Replacing the display bezel ”.
3 Replace the display assembly .
4 Replace the hinge covers .
5 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
6 Replace the wireless card .
7 Replace the solid-state drives .
8 Replace the memory modules .
9 Replace the base panel .
102