Dell Alienware 15 (Early 2015) User Manual
Page 78
Advertising
3 Remove the screws that secure the display assembly to the computer
base.
1
display assembly
2
computer base
3
screws (2)
4 Turn the computer over and open the display as far as possible.
5 Carefully remove the antenna cables through the slot on the computer
base.
6 Peel off the adhesive tape that secures the antenna cables to the system
board.
7 Remove the antenna cables from the routing guide on the display hinges.
8 Lift the latch and disconnect the display cable from the system board.
78
Advertising