Replacing the status-light board, Procedure, Post-requisites – Dell Alienware 15 (Early 2015) User Manual
Page 63: Status-light, Board
Replacing the status-light
board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the status-light board with the screw holes on the
palm-rest assembly.
2 Replace the screws that secure the status-light board to the palm-rest
assembly.
3 Slide the status-light board cable into the status-light board and press
down on the latch to secure the cable.
Post-requisites
1
Follow the procedure from step 5 to step 11 in “Replacing the
”.
2 Replace the
3 Replace the
.
4 Replace the
.
63