Dell Alienware 15 (Early 2015) - Manual (Page 98)

Replacing the display back-
cover
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Place the display back-cover on a clean and flat surface.
2 Follow the procedure from step 1 to step 3 in “Replacing the Alienware
AlienHead LED board ”.
3 Follow the procedure from step 1 to step 3 in “Replacing the display-panel
AlienFX LEDs ”.
4 Adhere the display board and camera cable to the display back-cover.
5 Route the display-board cable through the routing guides on the display
back-cover.
Post-requisites
1 Replace the camera .
2 Replace the display hinges .
3 Replace the display panel .
4 Follow the procedure from step 2 to step 5 in “Replacing the display bezel ”.
5 Replace the display assembly .
6 Replace the hinge covers .
7 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
8 Replace the wireless card .
9 Replace the solid-state drives .
10 Replace the memory modules .
11 Replace the base panel .
98