Replacing the display bezel, Procedure, Post-requisites – Dell Alienware 15 (Early 2015) User Manual
Page 87
Replacing the display bezel
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Follow the procedure from step 1 to step 2 in “Replacing the
”.
2 Connect the logo-board cable to the logo board and secure it with the
adhesive tape.
3 Slide the display-board cables into the logo board and press down on the
latches to secure the cables.
4 Carefully turn the display bezel over.
5 Align the display bezel with the display back-cover and gently snap the
display bezel into place.
Post-requisites
1
Replace the
2 Replace the
.
3 Follow the procedure from step 5 to step 11 in “Replacing the
”.
4 Replace the
5 Replace the
6 Replace the
.
7 Replace the
.
87