Dell Alienware 15 (Early 2015) - Manual (Page 73)

Replacing the front AlienFX
LED board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the front AlienFX LED boards with the screw holes
on the tubes.
2 Replace the screws that secure the front AlienFX LED boards to the tubes.
3 Connect the front AlienFX LED board cables to the front AlienFX LED
boards.
4 Align the screw holes on the front AlienFX LED boards with the screw holes
on the computer base.
5 Replace the screws that secure the front AlienFX LED board to the
computer base.
Post-requisites
1 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
2 Replace the solid-state drives .
3 Replace the memory modules .
4 Replace the base panel .
73