Dell Alienware 15 (Early 2015) - Manual (Page 71)

Removing the front AlienFX
LED boards
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base panel .
2 Remove the memory modules .
3 Remove the solid-state drives .
4 Follow the procedure from step 1 to step 11 in “Removing the palm rest ”.
Procedure
1 Remove the screws that secure the front AlienFX LED boards to the
computer base.
2 Lift the front AlienFX LED boards and disconnect the front AlienFX LED
board cables from the front AlienFX LED boards.
3 Remove the screws that secure the front AlienFX LED boards to the tubes.
71